#How to open razer keyboard how to#
#How to open razer keyboard mods#

Pop Open the SwitchДЄt this point you should be able to pop open the switch with just your hands. Keep your thumbnail wedged between the upper and lower housing while loosening the second clip. This is the part where it gets a little tricky, you want to carefully lift the clip while also making sure the switch doesnвЂ™t snap back together. Next, youвЂ™ll want to start loosening the second clip on the opposite side of the first clip. Once the clip has been loosened, slide your thumbnail between the upper and lower housing of the switch to keep the clips from snapping back in place. YouвЂ™ll want to slide the screwdriver head under one of the plastic clips and wedge it apart until the clip loosens. The first step is to simply loosen the first clip. The first few switches you disassemble will be quite slow, but youвЂ™ll speed up as you get better. The upside to this method is how easily accessible a flathead screwdriver is, you wonвЂ™t need to order any specialized tools. Taking apart a switch with a screwdriver will take a bit longer than using a switch opener and will require a bit of patience and a steady hand. Method 1: Screwdriver Method Tools Required: If you are using a switch opener, youвЂ™ll need one that works for that specific switch type (shown below). A screwdriver will work for taking both switch types apart, but the Kailh switch will require a lot more patience and tinkering. But the best way to figure out which type of switch you have is to inspect it for yourself. If your switch is not from Kailh, the switch will usually be in the Cherry style. This distinction is important because the Kailh style switch is much more difficult to open and will require a different switch opener tool. A Cherry MX style switch will be held together by four clips while the Kailh style switch will be held together by two. Determine Switch Type: Cherry or Kailh Kailh vs Cherry Style SwitchД«efore taking apart your switch, you should determine which type of switch you have on hand.

Regardless, weвЂ™ll teach you exactly what you need to do to fully disassemble a switch. Or perhaps youвЂ™re just intrigued by the way switches work and you want to take them apart to see how everything works. If youвЂ™re a little crazy, you could also make your own frankenswitch by cannabalizing parts from other switches to make a switch that is truly unique. Not to mention, repairing a switch can be done by taking it apart, inspecting what the issue may be, and fixing it quickly.

#How to open razer keyboard how to#

Whether you want to lube your switches or install switch film, learning how to pull apart a switch can be super useful.

#How to open razer keyboard mods#

Some of the best keyboard mods require you to dissassembly your keyboard. There are a multitude of reasons for why you may want to take apart your keyboard switch. There are some easily breakable components, so weвЂ™ll go over exactly what you need to do. There is some complexity to the process and some switches are built differently.

Taking apart a mechanical keyboard switch and understanding how it works is a super useful skill. There are two main methods to take apart a mechanical keyboard switch:ДЎ) Use a 1/16вЂќ flathead screwdriver to take apart the switch.Дў) Pull apart the switch with a specialized switch opener tool. Do not fear! In this article, weвЂ™ll go over how to take apart a switch and figure out whatвЂ™s going on under the hood. Only problem is, you have no idea how to take the switch apart. Perhaps one of your keyboard switches is not working properly, and it may be impossible to figure out whatвЂ™s wrong without taking the switch apart.